INVERTER,S PID FEEDBACK COMMAND LOSS DETECTION TIME, DWELL FREQUENCY FUNCTION , DROOP CONTROL GAIN AND DROP CONTROL DELAY TIME.



PID FEEDBACK COMMAND LOSS DETECTION TIME.

pid feedback loss detection time is to be set in unit  of second.

dwell frequency at start
dwell function is to maintain the output frequency at a certain value for a while the heavy load is started or stopped . to dwell the output frequency for some time can avoid stall out . the relations among these constants is as show in below.
b 6  - 0 3  dwell frequency at stop setting rang is 0,0~10,0 , frequency setting is 0.0
b 6 - 03 dwell frequency at stop setting range is 0.0~400.0. frequency setting is 0.0
b 6 - 04 dwell time at stop setting range is 0.0~10.0. frequency setting is 0.0

DROOP CONTROL GAIN.

set the slip as percentage of the slip at maximum frequency and rated torque .
note: slip (the slip at maximum output frequency and rated torque ). in unit of %.droop is disable when set as 0.0
b 7- 02  setting range is 0.0~100.0factory setting o.o

No comments