MOTOR 2 MIN/MAX OUTPUT FREQUENCY/VOLTAGE AND MOTOR 2 RATED CURRENT OF INVERTER.




MOTOR 2 MIN/MAX OUTPUT FREQUENCY/VOLTAGE.

It is the value for inverter  of 400 voltage class. for the inverter of 200 voltage class the value shall be divided by 2. 2. the value depends on the control  mode .  to set v/f characteristics in a straight line, set the  same value for e 4 - 0 4  and e 3 - 0 6 in this case the setting for e 4 - 0 5 will be disregarded . when e 1 - 0 3 = f , e 1 - 0 4 ~10 can be set  the setting except f is only for reference. when v/f characteristic is straight line , e 1 - 0 7 "mid output frequency" shall be set as same value in this case e 1 - 0 8 mid output frequency voltage , will be disregarded please set the four frequencies as follows, e 4 - 0 1 " f max "> e 4 - 0 3 " f a"> e 4 - 0 4 "f b " >e 4 - 0 6 "f main "





MOTOR 2 RATED CURRENT .

Set motor,s rated current in unit of a.
note: the setting depends on the inverter,s capacity the setting range is 10~200% of the inverter rated current . the setting range is 10% to 200% of the inverter rated output current . the default setting depends upon the inverter capacity . please set according to the rated current shown on the nameplate of motor.

No comments